![]() Flat Pack High Power Semiconductors: Robust high power diodes allow the FS Series to meet the new FailSafe criteria for conducting inrush currents 3,000 and 5,000 amps (FS30 and FS60 respectively) for the required duration period.Insures shore power safety ground wire is maintained through the isolator. ABYC A-28 July 2008 Compliant and Fail Safe Certified: Certified by Underwriters Laboratories (UL). Today the ABYC standards require the use of Fail Safe galvanic isolators such as the ProMariner ProSafe FS30 or the ProMariner ProSafe FS60.Both the ProSafe 30 and 60 Amp models are built on robust Flat Pack Semiconductor platforms, ensuring that in the event of a failure, the failure is safe by not compromising the ground continuity on-board when connected to AC Shore Power. 4 interest-free installments or from 40.34/mo. ![]() ![]() Please contact the manufacturer directly with any issues or concerns. ProSafe FS 30 is built on robust FlatPack semiconductor platforms ensuring that in the event of a failure. ![]() The ProSafe FS Series is UL Certified to meet the parameters of the ABYC A-28 recommendation ProSafe FS installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required by non FailSafe Certified galvanic isolators. Use the ProSafe FS30 for 30 Amp Shore Cord Applications Use the ProSafe FS60 for (1) 50Aor (2) 30 Amp Shore Cord Applications This product may not be returned to the original point of purchase. This technology maintains AC safety ground and solves the most common forms of corrosion and premature zinc loss within a boats bonding system. The ProSafe FS Series of FailSafe 30 and 60 Amp Galvanic Isolators will interrupt galvanic current flow with other boats at a marina when installed on a boat which is connected to AC Shore Power. Flat Pack High Power Semiconductors: Robust high power diodes allow the FS Series to meet the new FailSafe criteria for conducting inrush currents 3,000 and 5,000 amps (FS30 and FS60 respectively) for the required duration period.FailSafe Technology withPeace of Mind Dependability.ABYC A-28 July 2008 Compliant and Fail Safe Certified: Certified by Underwriters Laboratories (UL). ![]() The ProSafe FS Series is UL Certified to meet the parameters of the ABYC A-28 recommendation ProSafe FS installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required by non FailSafe Certified galvanic isolators. This technology maintains AC safety ground and solves the most common forms of corrosion and premature zinc loss within a boats bonding system. ProMariner ProMariner ProSport HD20 12/24 Litium ProMariner ProSport HD20 12/24/36V Litiu ProMariner Prosafe Galvanic Isolater FS30 (30A) ProSportHD 20 Plus. FailSafe Technology with Peace of Mind Dependability. Use the ProSafe FS30 for 30 Amp Shore Cord Applications Use the ProSafe FS60 for (1) 50 Amp or (2) 30 Amp Shore Cord Applications. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |